New or Reconditioned

Pocket Hole Machine

Download

  TSM21

movie clip

  HERE

The TSM-21 cuts the patented, 6 degree Castle pocket. It is highly useful for everything from case construction and drawer box assembly to custom work and face frame construction. The TSM-21 clamps the stock, routs a pocket, and drills a pilot hole with a tap of the foot pedal. The Castle Pocket is free of splinters or sawdust so it is clean and immediately ready for construction. The TSM-21 is extremely durable and designed for use by professional cabinet makers.

TSM-21 TECH SPECS

Router Motor - Porter Cable 1.5hp #6902
Drill Motor - Porter Cable .75hp #7301
Router Bit - 3/8" HSS Cobalt Rough Mill
Drill Bit - 9/64" Cobalt Brad Point

Power Req. - 110 VAC, 15 amps
Air Req. - 85 psi at 1 cfm

Shipping Dimensions - 26 x 24 x 48
Shipping Weight - 160 lbs

                     Model TSM35                   New or Reconditioned

Pocket Hole Machine

The TSM–35 cuts the same patented, 6 degree Castle pocket as the TSM–21.
It is designed to run continuously for two consecutive shifts. A heavy duty, three phase induction motor drives the pocket cutting spindle and is available in 208v, 230v or 460v. A specially designed, high torque, heavy duty, Sioux™ air motor drives the pilot bit. The TSM-35 can produce more than a half a million pockets per month for years on end with minimal maintenance.

TSM-35 Tech Specs

Router Motor - 1.5 hp, 3 Phase Induction Motor
Drill Motor - Sioux 1954HP Air Motor
Router Bit - 3/8" HSS Cobalt Rough Mill
Drill Bit - 9/64" Cobalt Brad Point

Power Req. - 208 or 230 or 460 VAC, 3 Phase
Air Req. - 85 psi with External Regulator, Filter & Lubricator

Shipping Dimensions - 26 x 32 x 49
Shipping Weight - 300 lbs.

                     Model Equalizer

               Gluepot Edgebander

FAST -  A quick-change glue pot, slide in outriggers and a quick-release band reel make this edge bander READY-TO-GO at a moments notice.
SAFE - The heat and melted glue are isolated to one contained location.
FLEXIBLE - Whether you are banding 4' x 8' panels, 6' toe kicks, or smaller drawer parts, the Equalizer brings it easily within your reach.
PROFESSIONAL - The true Hot-Melt bond is the stongest bond available.

The Equalizer is a true Hot Melt bander designed with Siemens controls and a footprint for the small shop environment. With Siemens temperature management technology, the glue reaches bonding temperature in under 20 minutes. The top-mounted strobe light lets the operator know when various stages in the heating cycle have been reached. This machine is for use with all edge banding including veneer, vertical grade laminate and up to 1.5 mm PVC

Equalizer Tech Specs

Controls - Siemens LOGO! PLC
Cold start to banding temp. in under 20 mins.
Quick-change glue pot for fast color changes
Adjustable Band Reel accepts many sizes of Banding
Pneumatic guillotine for band cutting.

Banding Width - 7/8” to 15/16”
Banding Thickness -0.018” to 0.02”
Banding Types - PVC, Vinyl & Wood .

Power Req. - 110 VAC, 15 amps
Air Req. - 80 psi at 1 cfm.

Dimensions - 24 x 60 x 40
Shipping Weight - 360 lbs.

                     Assembly Tables                   New

AT8-OB

AT5

FAST - The extruded aluminum arm glides smoothly on sets of sealed ball bearings.
SAFE - The bottom rail of the table is set at 32", while the angle of the tabletop is shallower than typical. This allows for a very comfortable stance that can be maintained for more hours with less stress to the user.
FLEXIBLE - Each table can be easily converted to use two arms or run an additional cylinder per arm. In addition, each table is available with a standard set up or with the Open Back to accept panel and frames taller than 4'